Naturally Green Products has Non-Green formulated products under our PERFORMER label. These products have caustic properties and CAUTION must be used while handling. PERFORMER Wood Floor Finish is a Premium water based Urethane/Acrylic floor finish that provides long-lasting beauty and protection to all wood floors.

There is no mixing of a catalyst - it is a single component system.

NOTE: This finish is to be used on previously sealed wood surfaces - not a bare wood floor. Use only after proper training.

READ ALL DIRECTIONS BEFORE APPLYING:

(failure to follow instructions will nullify this product's warranty)

PREPARE FLOOR:

(for previouly sealed surfaces - scrub & recoat)

1. Dust mop floor - remove all chewing gum and labels, etc.
2. Clean floor with 8 oz. per gallon mixture of a cleaner.
3. Screen with 120 grit screen or maroon wood pad to roughen floor.
4. Rinse floor with PH Neutral floor cleaner to remove all residue. APPLY FINISH: (stir gently before use)

APPLY FINISH:

1. Apply finish at rate of 800-1000 square feet per gallon of product.
2. Use a weighted T-bar with a clean synthetic pad.
3. Apply thin even coats with the grain of the wood, while walking at a slow, even pace. Walking too fast may produce excessive bubbling in the finish.
4. Allow 1 hour dry time between coats. Humid conditions may require longer dry time.
5. After the first coat has dried, apply second coat.

MAINTENANCE:

1. DAILY - Dust mop daily. Damp mop spills, salt residue, etc. with a PH Neutral floor cleaner using a thoroughly wrung mop.
2. WEEKLY - If soil is heavy - auto-scrub with red pads and 2 oz. per gallon dilution of PH Neautral floor cleaner in water. (NOTE: use only ph neutral cleaners, for other compounds will reduce product performance and longevity)